Ercolina manufactures innovative rotary draw tube, pipe and profile bending machine equipment, designed to produce quality repeatable precision bends in seconds. All Ercolina bending machines are operator friendly and can memorize bend angle as well as material spring back settings. Ercolina offers non mandrel and mandrel style tube and pipe benders capable of bending thick or thin wall tubing to centerline radius as small as 1-1/2 times the diameter with minimum deformation. Patented electro mechanical design eliminates older style manual benders and hydraulic tubing benders, reducing maintenance cost and shop floor space requirements.
Interested in a machine on this page? Call 503-581-1516 to get a quote, or look at the bottom of this page for leasing options!
Ercolina Medi Bender 070
Portable Pipe and Tube
Bending Machine.
Ideal for Contractors and fabricators with Job site bending
Bends 1/4" to
1-1/4"
Bend Angles from
0-180°
Programmable
bend angles with LED display
Program Spring
back
Remote foot
pedal
2HP 120 volt
1 Phase motor
Weight
100 lbs
Max Centerline
radius 6-7/8"
Minimum CLR 2D
Depending on wall thickness and material
Price - $4100.00 plus freight
Ercolina Giga Bender
Pipe and Tube Bending capacity
1" to 6"
Ideal for
bending large diameter Round Square, pipe tube solids etc.
Minimum CRL 2.5D
to 5D
Maximum CLR
27-3/4" 39-3/4" with extension
Angle range
0-180°
Programmable
touch pad, 30 programs with 9 bending sequences
Mandrel Capable
Positioner
capable
10 or 12.5 HP
motor 3Phase 220-440 volt
Weight 4000 lbs
Ercolina Mega Bender 030Pipe and Tube Bender
1/3" to 3"
Capacity bender
will make bends
as small as 2D without mandrel tooling.
30 bend programs
with 9 bends in each program.
programmable
spring back
remote foot
pedal
Swing away
patented counter bending die vice
Built in wheel
base and tilt handle
Mandrel capable
2 axis capable
2HP 50-60Hz 220/440 volt
3 phase
Price - $16,500.00 plus freight
Ercolina Top Bender TB60Pipe and Tube
Bender
Bending capacity
1/4" to 2.5"
Maximum
CLR 15", Minimum
CLR 2D
0-180° Angle Range
10
programs with nine (9) bends each
Built
in Wheels lift handle
No
Hydraulics
Accepts
2 axis positioning table
2 HP 3
phase 220/440 volt
Not
Mandrel capable
Remote
foot pedal
Two
bending speeds
Weight 430 lbs
Price - $13,900.00 plus freight
Ercolina SB48Pipe and Tube
Bender
Bending Capacity
from 1/4" to 2"
Ideal
for Pipe, Tube, Squares, Rectangles, solids
Bends
to 90° in 7 seconds
2 HP
motor 120
volt 50-60 Hz
10
programs with 9 bends in each program
Not
mandrel capable
Two
axis positioner capable
Price - $10,900.00plus freight
Ercolina Super Bender 060APipe and Tube
Bender
Bending capacity
1/4" to 2"
Minimum
CLR 2D
Maximum
CLR 8-7/8"
2 HP
120 volt 1 phase motor
Bending
speed 1.3 RPM
Rotary
Dial programming
2 axis
positioner capable
Weight 262 lbs
Price - $7900.00 plus freight
Ercolina MB42Pipe and Tube Bender
Bending capacity from 1/4" to 1.5"
Bends
as small as 2D with non-mandrel tooling
Built-in Base wheels and lift handle
Remote
foot pedal
No
hydraulic components
2 HP
1 Phase 120 volt motor
Maximum
CLR 7-1/2"
Bending
speed 2 RPM
Accepts
2 axis positioner
Ten
bend programs with 9 bends within each program
Weight 245 lbs
Ercolina MB42BPipe and Tube Bender
Portable Bench model
Bending
Capacity 1/4" to 1-1/2"
Bending
speed 2 RPM
Touchpad programming 10 and 9
Not
mandrel capable
Minimum CLR
2 x D
Maximum
CLR 7-1/2"
2 HP 1
Phase 120 volt
Weight 197 lbs
Ercolina 030 Mandrel BenderPipe and Tube
Bender
Bending
Capacity 3/8" to 3"
Minimum
CLR 1.5"
Maximum
CLR 7-3/4" with mandrel tooling
Variable bending speed to 2.2 RPM
Programmable touch pad
30 programs 9 bends each
NC
Control with automatic operation
1 or 3
phase 220/440 volt
Hydraulic Pump
5',
10', 20' tables available
Adjustable clamp and pressure die, quick change tooling
Weight 1400
lbs
Price - $38,000.00 plus freight
OREGON 2837 L. Breckenridge Lp. NW Salem, OR 97304 tel: 503-581-1516 fax: 503-371-0635 sales@machinetoolsjwk.com
CALIFORNIA
6025 Sepulveda Blvd. #201Van Nuys, CA 91411 tel: 818-994-1724 fax: 818-994-0549 sales@machinetoolsjwk.com
TAXABLE SALES IN CA Banak Machinery 6025 Sepulveda Blvd. #201, Van Nuys, CA 91411 tel: 818-994-1724 fax: 818-994-0549 Banak does not accept credit cards
Small Business Exchange
703 Market Street Suite 1000
San Francisco, CA