|
Jet Machine Shop
The editors of the top woodworking magazines have rated many of our JET® tools as being the best in the business in same tool category comparisons. From tablesaws to dust collectors and accessories, publishers have recognized JET branded products as being the top woodworking tools you can buy.
Call to get a quote, or look at the bottom of this page for leasing options! |
|
| STOCK NUMBER |
321360A |
| Model Number |
BDB-1340A |
| Swing over Bed (in.) |
13 |
| Swing over Cross Slide (in.) |
7-25/32 |
| Swing over Gap (in.) |
18-3/4 |
| Length of Gap (in.) |
8 |
| Distance between Centers (in.) |
40 |
| Spindle Bore (in.) |
1-3/8 |
| Spindle Mount |
D1-4 |
| Spindle Taper (with sleeve) |
MT-5 (MT-3) |
| Number of Spindle Speeds |
12 |
| Range of Spindle Speeds (RPM) |
60-1,240 |
| Number of Longitudinal & Cross Feeds (in./rev.) |
40 |
| Range of Longitudinal Feeds (in/rev) |
.0036-0.1005 |
| Range of Cross Feeds (in/rev) |
.0012-.0345 |
| Number of Inch Threads |
40 |
| Range of Inch Threads (T.P.I.) |
4-112 |
| Number of Metric Threads |
27 |
| Range of Metric Threads (mm) |
0.2-6 |
| Maximum Tool Size (in.) |
5/8 x 5/8 |
| Compound Slide Travel (in.) |
2-11/16 |
| Cross Slide Travel (in.) |
6-5/16 |
| Carriage Travel (in.) |
35 |
| Tailstock Spindle Travel (in.) |
3-3/4 |
| Tailstock Taper |
MT-3 |
| Steady Rest Capacity (in.) |
2-5/8 |
| Follow Rest Capacity (in.) |
2-3/4 |
| Width of Bed (in.) |
7-3/8 |
| Overall Dimensions with Stand (in./L x W x H) |
71 x 32 x 45 |
| Motor |
2 HP, 230V, 1Ph |
| Net Weight ( lbs.) |
954 |
|
Belt Drive Bench Lathe
- Enclosed gearbox design provides
smooth, quiet operation
- Fast, easy speed changes
- Low voltage motor controls
- Helical cut headstock gears reduce
noise
- Change gears allow metric threading
- Spindle is supported by precision
tapered roller bearings
- V-way bed is induction hardened and
ground
- Gap bed section provided for large
diameter work
- Independent leadscrew and feed rod
- T-slotted compound slide with four-way
tool post
- Carriage mounted spindle control
lever
- Automatic feeding and threading are
fully interlocked
- Feed selectors travel in grooved ways
- Tailstock may be offset for turning
tapers and includes an inch/metric
graduated quill
- Oil pan included
- Tolerance test certificate included
321360A -
"BDB-1340A, Belt, 13" Swing 40" Centers, 2HP, 1 Ph, 230V - $3343.00
321121 - BDB-1340A Lathe with Acu-Rite 200T DRO Installed - $5556.00
321130 - BDB-1340A Lathe with Newall C80 DRO Installed - $5538.00
plus freight
Optional
321443AK
Cabinet Stand - $449.95 plus freight |
|
Geared Head Bench Lathe
- Enclosed gearbox design provides smooth, quiet operation
- Fast, easy speed changes
- Hardened and ground gears are
featured in the headstock and gearbox
- Dl-4 spindle is precision ground for
accuracy and supported by high
quality tapered roller bearings
- Headstock is constantly oiled during operation
- Gear box gives wide inch threading and
feed capabilities with no gear changes
- V-way bed design is induction
hardened and ground
- Gap bed section provided for larger
diameter work
- Independent leadscrew and feed rod
- Spindle actuation control is apron-
mounted
- Compound and cross slide have
backlash elimination
- Adjustable gibs are incorporated in
the carriage and slideways
- Tailstock may be offset for turning tapers
and includes an inch-metric graduated quill
- Oil pan included Tolerance test certificate included
321357A
- GHB-1340A, 13" Swing 40" Centers, 2HP, 1 Ph, 230V
$4019.95
321122 GHB-1340A Acu-rite DRO
$5999.00
321123 GHB-1340A Acu-rite DRO and Taper
Attachment
$6995.95
321131 GHB-1340A Newall C80 DRO and Collet Closer
$7349.00
plus freight
Optional
321443AK Cabinet Stand
$449.95 |
| STOCK NUMBER |
321357A |
| Model Number |
GHB-1340A |
| Swing over Bed (in.) |
13 |
| Swing over Cross Slide (in.) |
7-25/32 |
| Swing through Gap (in.) |
18-3/4 |
| Length of Gap (in.) |
8 |
| Distance between Centers (in.) |
40 |
| Spindle Bore (in.) |
1-3/8 |
| Spindle Mount |
D1-4 |
| Spindle Taper (with sleeve) |
MT-5 (MT-3) |
| Number of Spindle Speeds |
8 |
| Range of Spindle Speeds (RPM) |
70-2,000 |
| Number of Longitudinal & Cross Feeds (in./rev.) |
40 |
| Range of Longitudinal Feeds (in/rev) |
.0036 - .1005 |
| Range of Cross Feeds (in/rev) |
.0012 - .0345 |
| Number of Inch Threads |
40 |
| Range of Inch Threads (T.P.I.) |
4 -
112 |
| Number of Metric Threads |
27 |
| Range of Metric Threads (mm) |
0.2-6 |
| Maximum Tool Size (in.) |
5/8 x 5/8 |
| Compound Slide Travel (in.) |
2-11/16 |
| Cross Slide Travel (in.) |
6-5/16 |
| Carriage Travel (in.) |
35 |
| Tailstock Spindle Travel (in.) |
3-3/4 |
| Tailstock Taper |
MT-3 |
| Steady Rest Capacity (in.) |
2-5/8 |
| Follow Rest Capacity (in.) |
2-3/4 |
| Width of Bed (in.) |
7-3/8 |
| Overall Dimensions with Stand (in./L x W x H) |
71 x 32 x 47 |
| Main Motor |
2HP, 1Ph,
230V Only |
| Net Weight ( lbs.) |
1015 |
|
|
| STOCK NUMBER |
321810 |
| Model Number |
GH-1340W-1 |
| Swing Over Bed (in.) |
13 |
| Swing Over Cross Slide (in.) |
7-1/2 |
| Swing Through Gap (in.) |
19 |
| Distance Between Centers (in.) |
40 |
| Spindle Bore (in.) |
1-1/2 |
| Spindle Mount |
D1-4 |
| Spindle Taper (With Sleeve) |
MT-5 (MT-3) |
| Number of Spindle Speeds |
12 |
| Range of Spindle Speeds (RPM) |
40-1,800 |
| Number of Longitudinal and Cross Feeds |
40 |
| Range of Longitudinal Feeds (in./rev.) |
0.0012 - 0.0294 |
| Range of Crossfeeds (in./rev.) |
0.0003 - 0.0103 |
| Number of Inch Threads |
40 |
| Range of Inch Threads |
4-112 |
| Number of Metric Threads |
22 |
| Range of Metric Threads (mm) |
0.45 - 7.5 |
| Maximum Tool Size (in.) |
5/8 x 5/8 |
| Maximum Compound Slide Travel (in.) |
3-1/2 |
| Maximum Cross Slide Travel (in.) |
6-3/8 |
| Maximum Carriage Travel (in.) |
37-1/2 |
| Tailstock Spindle Travel (in.) |
4-3/4 |
| Taper in Tailstock Spindle |
MT-3 |
| Steady Rest Capacity (in.) |
3-3/4 |
| Follow Rest Capacity (in.) |
2-3/4 |
| Width of Bed (in.) |
10-1/2 |
| Motor |
3HP, 230V, 1Ph |
| Overall Dimensions (in./L x W x H) |
73-3/4 x 29-1/2 x 46-3/4 |
| Net Weight (lbs.) |
2081 |
|
GH-1340W-1 Floor Model
Standard Features
- Uniquely designed exclusively by JET*
- Hardened and ground gears are featured in the
headstock and gearbox
- Dl-4 spindle is precision ground for accuracy and
supported by high-quality tapered roller bearings
- Headstock is constantly oiled during operation
- Splined, not keyed, shafts are utilized in the
headstock
- Gearbox gives large threading and feed
capabilities with no gear changes
- V-way bed design is induction hardened and ground
- Gap bed section provided for larger diameter work
- Independent leadscrew and feed rod
- Spindle actuation control is apron mounted
- Inch-metric dials are standard
- Compound and cross slide have backlash
elimination
- Adjustable gibs are incorporated in the carriage
and slideways
- Tailstock may be offset for turning tapers and
includes an inch-metric graduated quill
- Tolerance test certificate included
Standard Equipment
- Heavy-Duty Stand
- 6" 3-Jaw Direct Mount Chuck with Top Reversing
Jaws
- 8" 4-Jaw Chuck
- 12" Face Plate
- Four-way Tool Post
- Steady and Follow Rest
- Micro-Carriage Bed Stop
- Front Removable Chip Tray
- Spindle Jog Button
- Foot Brake
- Coolant System with Splash Guard
- Metric Change Gears
- Halogen Work Lamp
- Centers and Headstock Center Sleeve
- Threading Dial
- Tool Box and tools
321810 - GH-1340W-1, 13" Swing 40" Centers, 3HP,
1Ph, 230V
$6095.00
321132 GH-1340W-1 with Newall C80 DRO
$8694.00
321582 GH-1340W-1 with Newall C80 DRO and Collet
Closer
$9874.00
321538 GH-1340W-1 With Acu-rite 200T DRO, Taper attachment
and Collet closer
$11,232.00
plus freight
|
|
GH-1440W-1 Floor Model
Standard Features
- Uniquely designed exclusively by JET*
- Hardened and ground gears are featured in the
headstock and gearbox
- Dl-4 spindle is precision ground for accuracy and
supported by high-quality tapered roller bearings
- Headstock is constantly oiled during operation
- Splined, not keyed, shafts are utilized in the
headstock
- Gearbox gives large threading and feed
capabilities with no gear changes
- V-way bed design is induction hardened and ground
- Gap bed section provided for larger diameter work
- Independent leadscrew and feed rod
- Spindle actuation control is apron mounted
- Inch-metric dials are standard
- Compound and cross slide have backlash
elimination
- Adjustable gibs are incorporated in the carriage
and slideways
- Tailstock may be offset for turning tapers and
includes an inch-metric graduated quill
- Tolerance test certificate included
Standard Equipment
- Heavy-Duty Stand
- 6" 3-Jaw Direct Mount Chuck with Top Reversing
Jaws
- 8" 4-Jaw Chuck
- 12" Face Plate
- Four-way Tool Post
- Steady and Follow Rest
- Micro-Carriage Bed Stop
- Front Removable Chip Tray
- Spindle Jog Button
- Foot Brake
- Coolant System with Splash Guard
- Metric Change Gears
- Halogen Work Lamp
- Centers and Headstock Center Sleeve
- Threading Dial
- Tool Box and tools
321830 - GH-1440W-1, 14" Swing 40" Centers, 3HP, 1Ph, 230V
$6699.00
321550 GH-1440W-1 with Acu-rite 200T DRO and Taper
attachment
$10,095
321542 GH-1440W-3 with Anilam 211L DRO and collet
closer
$10,491.00
plus freight
|
| STOCK NUMBER |
321830 |
| Model Number |
GH-1440W-1 |
| Swing Over Bed (in.) |
14 |
| Swing Over Cross Slide (in.) |
8-1/2 |
| Swing Through Gap (in.) |
20 |
| Distance Between Centers (in.) |
40 |
| Spindle Bore (in.) |
1-1/2 |
| Spindle Mount |
D1-4 |
| Spindle Taper (With Sleeve) |
MT-5 (MT-3) |
| Number of Spindle Speeds |
12 |
| Range of Spindle Speeds (RPM) |
40-1,800 |
| Number of Longitudinal and Cross Feeds |
40 |
| Range of Longitudinal Feeds (in./rev.) |
0.0012 - 0.0294 |
| Range of Crossfeeds (in./rev.) |
0.0003 - 0.0103 |
| Number of Inch Threads |
40 |
| Range of Inch Threads |
4-112 |
| Number of Metric Threads |
22 |
| Range of Metric Threads (mm) |
0.45 - 7.5 |
| Maximum Tool Size (in.) |
5/8 x 5/8 |
| Maximum Compound Slide Travel (in.) |
3-1/2 |
| Maximum Cross Slide Travel (in.) |
6-3/8 |
| Maximum Carriage Travel (in.) |
37-1/2 |
| Tailstock Spindle Travel (in.) |
4-3/4 |
| Taper in Tailstock Spindle |
MT-3 |
| Steady Rest Capacity (in.) |
3-3/4 |
| Follow Rest Capacity (in.) |
2-3/4 |
| Width of Bed (in.) |
10-1/2 |
| Motor |
3HP, 230V, 1Ph |
| Overall Dimensions (in./L x W x H) |
73-3/4 x 29-1/2 x 47-1/2 |
| Net Weight (lbs.) |
2191 |
|
|
 |
Large Spindle Bore Lathes 3-1/8"
Models: GH-1440ZX, GH-1460ZX, GH-1640ZX, GH-1660ZX, GH-1840ZX, GH-1860ZX, GH-1880ZX |
|
JTM-1050EVS Electronic Variable Speed Milling Machine
10" x 50"
Table R-8 Spindle, 230 or 460 volt
$11,225.00 plus freight |
|
|
 |
Model JTM-1050 Milling Machine
Chrome lead screw on X and Y axis, Variable speed 10" x 50" table,
R-8 Spindle
$9925.00 plus freight |
|
JTM-4VS Variable Speed Milling Machine
9" x 49" table, R-8
Spindle
$6999.00 plus freight |
|
|
 |
JVM-836 Vertical Milling Machine
1 or 3 Phase, R-8 Spindle, 8" x 36"
table, chromed quill with X powerfeed installed
$4725.00 plus freight |
|
|
| STOCK NUMBER |
414520 |
414524 |
| Model |
JPSG-1020A |
JPSG-1224A |
| Table Size (in.) |
8 x 20 |
12 x 24 |
| Grinding Capacity (in./W x L) |
8-1/4 x 21-5/8 |
12-3/16 x 25-1/2 |
| T-slots, (Number) Size (in.) |
(1) 1/2 |
(1) 1/2 |
| Maximum Table Load (lbs.) |
660 |
880 |
| Longitudinal Manual Table Travel (max./in.) |
24 |
28 |
| Longitudinal Auto. Table Travel (max./in.) |
22-3/8 |
25-9/16 |
| Longitudinal Table Speed (FPM) |
10 - 82 |
10 - 82 |
| Cross Table Travel (in.) |
8-13/16 |
12-9/16 |
| Cross Hand wheel Graduation (in.) |
0.001 |
0.001 |
| Cross Hand wheel per Revolution (in.) |
0.2 |
0.2 |
| Cross Feed per Auto. Pass (in.) |
0.02 - 0.32 |
0.02 - 0.32 |
| Spindle Centerline to Table (max./in.) |
16-5/16 |
20 |
| Vertical Hand wheel Graduation (in.) |
0.0001 |
0.0001 |
| Vertical per Hand wheel Revolution (in.) |
0.01 |
0.01 |
| Auto. Vertical Down feed Steps (in.) |
.00008, .00024, .0004 |
.00008, .00024, .0004 |
| Wheel Diameter (max./in.) |
8 |
12 |
| Wheel Thickness (max./in.) |
3/4 |
1-1/4 |
| Wheel Center Bore (in.) |
1-1/4 |
3 |
| Spindle Speed (RPM) |
3,450 |
1,725 |
| Cross Feed Motor |
1/5 HP |
1/5 HP |
| Elevating Motor |
1/4 HP |
1/4 HP |
| Hydraulic Motor |
1 HP |
2 HP |
| Main Motor (TEFC) |
2HP, 230/460V, 3Ph, prewired 230V |
3HP, 230/460V, 3Ph, prewired 230V |
| Overall Dimensions (in./W x D x H) |
100 x 62 x 86 |
110 x 76 x 89 |
| Net Weight (lbs.) |
2860 |
3850 |
|
Model JPSG-1020A
Precision Automatic Surface Grinders
Standard Features
- Base, saddle, table and
column feature high quality cast iron
- Fully automatic
operation in 3-axis
- Vertical feed features
hydraulic 3-step selection
- Rapid vertical motor
increases work efficiency
- Slide ways are hand
scraped and Turcite coated allowing smooth operation
- Spindle incorporates
(4) class 7 bearing for high accuracy
- Automatic continuous
lubrication system with low oil warning lamp
- Hydraulic tank features
a heat exchanger to maintain operating temperature
- Low Voltage controls
include overload protection
- Convenient central
control panel includes all buttons and switches
Standard Equipment
- Electromagnetic chuck
- Complete coolant and
dust collection system
- Hydraulic motor and
pump
- Wheel balancing base
- Halogen work lamp
- Balancing arbor
- Grinding wheel
- Wheel flange
- Diamond wheel dresser
- Leveling blocks
- Wheel extractor
- Tool box with tools
414520 - JPSG-1020A, 8" x 20" Table, 3-axis Fully Automatic, 2 HP 3Ph,
230/460V Prewired 230V
$21,499.00 plus freight
414524 - JPSG-1224A, 12" x 24" Table, 3-axis Fully Automatic, 3 HP 3Ph,
230/460V, Prewired 230V
$27,995.00 plus freight |
|
|
